eroticlosa.blogg.se - Mikrotik license chr

Via scp, wget or any other tool download CHR raw image (.img file) into this directory.

Default local storage is located in: var/lib/vz/images/(VM_ID)

Log into ProxMox host via SSH and navigate to the VM image directory.

Make sure that VM storage is on local storage (this way there will no need to work with the LVM config side, and the disk image can be moved later on to LVM or other desired storage if needed).

Note: It's a good idea to create a second test VM so you can refer to it's.conf file to make sure you get the syntax right Alternative approach Look in /etc/pve/qemu-server/ for a file with the VM number followed by.

For adding the existing file to the VM, edit the VM's.

There should be a subdirectory called images with a directory for each VM (named by the VM number).

Local storage on ProxMox is in /var/lib/vz directory.

conf file or replace the previously created system image file used for booting the guest.

Either copy the file to the server and then manually edit the VM's.

Use scp or any other comparable tool as that will use SSH for the upload and it does not require any additional configuration.

Then you have to manually upload the CHR disk (in qcow format) on the ProxMox host.

Create a new guest with the system disk and other devices as required.

Keep in mind that you will need a Mikrotik CHR License if you plan to use it with more than 1Mbps after the trial license expires. We recommend to read and follow this guide for securing your mikrotik router. You should now be able to connect using winbox.ĭon’t forget to update the CHR to the latest version and set up the firewall to only accept access from your trusted IPs (Don’t leave everything exposed). We add the default route /ip route add dst-address=0.0.0.0/0 gateway=2.56.212.1Īnd we set up DNS (we recommend google dns) /ip dns set servers=8.8.8.8,8.8.4.4 We next configure the IP address on this interface /ip address add address="2.56.212.40/24" interface=ether1 The WAN interface (which should be the only one) is ether1. (Please use a really strong password) /user set 0 password="123456" This should be done before the network configuration is set. The second thing to do is to change the admin password. Enter admin as the username and just press enter when asked for the password. A new window will be opened with the novnc console.